Product Characteristics

....01. Can be converted to 5Gas Analyzer Module.
....02. Automatic Temperature Adjustment (2~8 min)
....03. Slick Design
....04. Automatic Preheat Time Adjustment (2~8 min) ...
....* Registered as Conditional Auto Repair Equipment

Product Specifications

...QRO-401

Target Subject CO, HC, CO2, O2, (Excess Air Ratio), AFR, NOx (optional)
Sensor Theory CO, HC, CO2: Non-Dispersive Infrared Analysis (NDIR)
O2, NOx: Electrochemical Cell
Analysis Range CO 0.00 ~ 9.99% HC 0 ~ 9999 ppm
Resolving Power
0.01% 1 ppm
Display 4 digit 7segment LED 4 digit 7segment LED
Analysis Range CO2 0.0 ~ 20.0% O2 0.00 ~ 25.00 %
Resolving Power
0.1% 0.01 %
Display 4 digit 7segment LED 4 digit 7segment LED
Analysis Range
0 ~ 2.000 AFR 0.0 ~ 99.0
Resolving Power
0.001 0.1
Display 4 digit 7segment LED 4 digit 7segment LED
Repetition Rate
Lower than 2% FS
Response Time
Within 10 seconds (90% of the time)
Preheat Time
Approx. 2~8 minutes
Sample Requirement
4 ~ 6 L/min
Voltage Use
AC110V or AC220V 10%, 50/60Hz
Power Consumption
Approx. 50W
Category Temperature
0 ~ 40
Size
285 (W) * 410 (D) * 155 (H) mm
Weight
4.5 kg
Included Accessories
Probe, Probe Hose, Emergency Fuse, Water Leak Testing Cap, Emergency Filter, Instruction Manual, Power Cord, Ground Wire, and Type Approval Certificate

Optional Accessories

Printer, Printer Paper, RS232